Double Wing Aircraft Plans Sun, 08 Mar 2026 07:54:03 +0000 Sun, 08 Mar 2026 07:54:03 +0000 PhlatForum http://www.phlatforum.com/xenforo/forums/double-wing-aircraft-plans/ Tue, 18 Mar 2014 17:33:00 +0000 http://www.phlatforum.com/xenforo/threads/christeneagle-30.3293/ http://www.phlatforum.com/xenforo/threads/christeneagle-30.3293/ invalid@example.com (ewo) ewo
I dont remember where i got this file but i had it stashed on my old computer to make up one day
I guess today is the day .........
skp and cut files to follow shortly]]> 5 Mon, 25 Mar 2013 11:19:56 +0000 http://www.phlatforum.com/xenforo/threads/big-bipe.3081/ http://www.phlatforum.com/xenforo/threads/big-bipe.3081/ invalid@example.com (Flashsolutions) Flashsolutions
For this project you will need 3 sheets of Dow FFF and 1 sheet of 1/2" white styrofoam insulation foam, all available from Lowes. You will also need a can of 3M 77 or equivalent spray adhesive although you could use TiteBond or other adhesives as an alternate...

Big Bipe]]> 5 Fri, 11 Jan 2013 06:37:55 +0000 http://www.phlatforum.com/xenforo/threads/full-fuse-christine-eagle.2264/ http://www.phlatforum.com/xenforo/threads/full-fuse-christine-eagle.2264/ invalid@example.com (popedan41) popedan41

Attached files ...

full fuse christine eagle]]> 10 Thu, 10 Jan 2013 18:39:09 +0000 http://www.phlatforum.com/xenforo/threads/midnite-punkun.110/ http://www.phlatforum.com/xenforo/threads/midnite-punkun.110/ invalid@example.com (7up) 7up


]]> 1 Thu, 10 Jan 2013 18:36:21 +0000 http://www.phlatforum.com/xenforo/threads/dirty-deeds-28-by-frank-rcfc.947/ http://www.phlatforum.com/xenforo/threads/dirty-deeds-28-by-frank-rcfc.947/ invalid@example.com (mrbubbs) mrbubbs Post by Frank rcfc » Thu Jan 08, 2009 2:17 am

Sweet little biplane. Made for possibly indoor? All files included to make the cut.



Attached files Dirty Deeds Bipe.zip (252.6 KB)Â ]]> 1 Thu, 10 Jan 2013 18:35:13 +0000 http://www.phlatforum.com/xenforo/threads/calypso-33-by-frank-rcfc.949/ http://www.phlatforum.com/xenforo/threads/calypso-33-by-frank-rcfc.949/ invalid@example.com (mrbubbs) mrbubbs Post by Frank rcfc » Wed Jan 07, 2009 10:27 pm

Calypso Biplane 33" wing span.By Pat MacKenzie. Pulled off of RCG. This looked like a nice simple build. Fuse parts lock in place for alignment. All files needes are included.



Attached files Calypso 33.zip (219.2 KB)Â...

Calypso 33 by Frank rcfc]]> 1 Thu, 10 Jan 2013 18:34:04 +0000 http://www.phlatforum.com/xenforo/threads/infineon-bipe-32-by-frank-rcfc.950/ http://www.phlatforum.com/xenforo/threads/infineon-bipe-32-by-frank-rcfc.950/ invalid@example.com (mrbubbs) mrbubbs Post by Frank rcfc » Wed Jan 07, 2009 8:22 pm

Sweet biplane. Dave Roydes design. Also done by Firetrappe. All files needed are included.



Attached files Infineon.zip (515.6 KB)Â ]]> 1 Mon, 17 Dec 2012 13:03:32 +0000 http://www.phlatforum.com/xenforo/threads/the-twirl.551/ http://www.phlatforum.com/xenforo/threads/the-twirl.551/ invalid@example.com (theothers) theothers
Attached files...

The Twirl]]> 3 Mon, 08 Oct 2012 13:59:15 +0000 http://www.phlatforum.com/xenforo/threads/jeep-o-plane.2113/ http://www.phlatforum.com/xenforo/threads/jeep-o-plane.2113/ invalid@example.com (7up) 7up [EDIT] 03-11-2011
Updated files with proper wing chord size. I had the wing size wrong but I corrected all files and re-posted.

Here is a 30" WS, 1/4" foam Jeep-O-Plane. I threw one together just to check for errors in the plans and cut files. Everything fits together nicely after I corrected a couple mistakes. Now that the files are done I can work on finding the CG and determine my servo placement.

Construction is a no brainer. I attached the top to one of the fuse sides, working...

Jeep-O-Plane]]> 35 Tue, 28 Feb 2012 18:07:50 +0000 http://www.phlatforum.com/xenforo/threads/bipi-pronounced-by-pie-a-twist-on-the-pi-plane.2702/ http://www.phlatforum.com/xenforo/threads/bipi-pronounced-by-pie-a-twist-on-the-pi-plane.2702/ invalid@example.com (dz1sfb) dz1sfb
Pronounced By-Pie, got the inspiration from I think it is SR71fan's DarkPi.

Wingspan - 18"
Wing area - 252.5 sq. in.
Motor - 1700 Kv 24g Blue Wonder
ESC - 10A Turnigy Plush
Servos - Three 10g HK analog
Battery - 850 mAh 2s
Prop - APC 8 x 3.8
AUW - 8.5 oz
CG - 5.625" from LE at center of upper wing
Airframe material - 4mm XPS foam (derivative of dollar tree foam)
Rates - 100% aileron, elevator, and rudder
Expo - 75% ailerons only (at...

BiPi (Pronounced By-Pie) a twist on the Pi plane]]> 19 Fri, 27 Jan 2012 03:43:51 +0000 http://www.phlatforum.com/xenforo/threads/swoosh-update-again.219/ http://www.phlatforum.com/xenforo/threads/swoosh-update-again.219/ invalid@example.com (7up) 7up SWOOSH

I made some adjustments and regenerated the Phlatcode... (Update 01-20-09)
I made some adjustments and regenerated the Phlatcode... (Update 01-21-09) Hope this does it.

Hey guys, I been wanting something that just floats around that can fly at a walking pace and still be maneuverable. I haven't had a chance to test it but I came up with this "pocket" wing design which also doubles as a "KF Step" for even more lift. Ah, in theory it should work, so if anyone...

Swoosh (update again)]]> 23 Sun, 09 Oct 2011 13:05:08 +0000 http://www.phlatforum.com/xenforo/threads/4s-bipe-24-version-by-frank-rcfc.959/ http://www.phlatforum.com/xenforo/threads/4s-bipe-24-version-by-frank-rcfc.959/ invalid@example.com (mrbubbs) mrbubbs Post by Frank rcfc » Sat Dec 27, 2008 1:30 pm

Sweet. I flew this one earlier this summer and it was really agile. Looked great doing stunts especially that last one where I drove it right into the ground :roll: Yes it is another Gene Bond special. The guy makes nice simple planes that are really fun to build and fly. This is a 2 part file. Not quite enough room for everything on one sheet of foam. files included are of course, skp,cnc and a jpeg shot of the layed out...

4S-Bipe 24 version by Frank rcfc]]> 3 Sat, 04 Sep 2010 19:46:58 +0000 http://www.phlatforum.com/xenforo/threads/pt-17-biplane-profile-of-course.1572/ http://www.phlatforum.com/xenforo/threads/pt-17-biplane-profile-of-course.1572/ invalid@example.com (frankrcfc) frankrcfc It is a 38" wing span. 2 cnc files. A quick readme and the sketchup file itself are in the zip file. Haven't built it yet but as soon as I get Buks phlatjack plane up in the air I will start this
one :mrgreen:

Here is the post on rcg http://alturl.com/79kv

Attached files PT-17 Biplane. Profile of course.]]> 12 Thu, 01 Apr 2010 10:45:12 +0000 http://www.phlatforum.com/xenforo/threads/sloroller.1332/ http://www.phlatforum.com/xenforo/threads/sloroller.1332/ invalid@example.com (sdparkflyers) sdparkflyers
I came up with my Name after testing here indoor and the fact that she rolls slow and smooth.

Download the free PDF and build yours today.

Make sure that when you print the file you check
these two boxes under print the...

Sloroller]]> 27 Tue, 16 Mar 2010 01:00:06 +0000 http://www.phlatforum.com/xenforo/threads/sleipner.1342/ http://www.phlatforum.com/xenforo/threads/sleipner.1342/ invalid@example.com (tsknutsen) tsknutsen
I have no idea how it will fly yet, but i think(hope) it would not be too half bad. The plane is more or less made out of free imagination, the only inspiration i've had is some vague recolection of an indoor bipe in realflight simulator.
Hopefully someone will try...

Sleipner]]> 3 Fri, 12 Mar 2010 20:56:10 +0000 http://www.phlatforum.com/xenforo/threads/tensor-28-bipe.190/ http://www.phlatforum.com/xenforo/threads/tensor-28-bipe.190/ invalid@example.com (Crash) Crash

I do not know who originally designed this plane, so all I can do is give (as credit) the website where I got the DXF file. This 28" wingspan design is based on the DXF file for the 22" Mini Tensor from the following website:

http://www.rcplans.nl

I like planes in the range of 28" to 32" wingspan, as they are easily transported in my little...

Tensor 28 Bipe]]> 19 Mon, 08 Feb 2010 13:50:55 +0000 http://www.phlatforum.com/xenforo/threads/micro-mini-ultimate.1207/ http://www.phlatforum.com/xenforo/threads/micro-mini-ultimate.1207/ invalid@example.com (Flashsolutions) Flashsolutions
This is a 3mm full fuse plane powered by components from a used Parkzone Sukhoi.

The plane shown in the video has the original Sukhoi prop, but it flys much slower with a GWS 5x3 prop modified to fit the small prop shaft of the Sukhoi motor.

I also learned from building the first ultimate that it is better to install the center fuse support first and then wrap the rear...

Micro Mini Ultimate]]> 3 Mon, 04 Jan 2010 03:03:29 +0000 http://www.phlatforum.com/xenforo/threads/pontoon-plane.1104/ http://www.phlatforum.com/xenforo/threads/pontoon-plane.1104/ invalid@example.com (tsknutsen) tsknutsen

My idea is to make this as a waterplane of sorts. Therefore the floaters in front and back

Any feedback would be apreciated



-tsknutsen Attached files Pontoon plane]]> 4 Sun, 13 Dec 2009 05:28:17 +0000 http://www.phlatforum.com/xenforo/threads/ultimate-full-fuse.1039/ http://www.phlatforum.com/xenforo/threads/ultimate-full-fuse.1039/ invalid@example.com (7up) 7up Infineon build. It is marked up for 1/4" FFF and 1/8" bit. Enjoy!

Attached files Ultimate Full Fuse.skp (1.6 MB)Â Ultimate Full...

Ultimate Full Fuse]]> 9 Fri, 20 Nov 2009 07:47:36 +0000 http://www.phlatforum.com/xenforo/threads/react-bipe-not-yet-test-flown-by-request-by-anyairrc.964/ http://www.phlatforum.com/xenforo/threads/react-bipe-not-yet-test-flown-by-request-by-anyairrc.964/ invalid@example.com (mrbubbs) mrbubbs Post by AnyAirRc » Tue Oct 14, 2008 10:05 pm

Here is my Reactor Bipe clone 26" wing span for 1/8th" thick foam 20"x30" (I use ReadIBoard). Make sure you home the printer with the bit just fully under the right side of the foam and dang near touching the foam. I have yet to test fly this but I am sure it will kick but! Attached files react.zip (30.6 KB)Â...

React Bipe not yet test flown by request, by AnyAirRc]]> 1 Fri, 20 Nov 2009 06:22:29 +0000 http://www.phlatforum.com/xenforo/threads/acrostar-biplane-35-by-frank-rcfc.944/ http://www.phlatforum.com/xenforo/threads/acrostar-biplane-35-by-frank-rcfc.944/ invalid@example.com (mrbubbs) mrbubbs Post by Frank rcfc » Mon Jan 19, 2009 2:32 am

Found a good 3 sided shot of this plane and figured it would be fun building it. The wing locks in for alignment. Nice little Biplane.



Attached files Acrostar.zip...

Acrostar Biplane 35 by Frank rcfc]]> Wed, 11 Nov 2009 16:59:19 +0000 http://www.phlatforum.com/xenforo/threads/3d-foamy-bi-night-biplane.843/ http://www.phlatforum.com/xenforo/threads/3d-foamy-bi-night-biplane.843/ invalid@example.com (rayclark) rayclark http://www.rcgroups.com/forums/showthread.php?t=674182 ).

The phlatcode is for 1/4" FF. 1/8" cutting bit. Feedrate is 140ipm. You may want to change this to meet your requirements. Attached files...

3D Foamy (Bi Night) Biplane]]> 2 Sat, 17 Oct 2009 18:14:01 +0000 http://www.phlatforum.com/xenforo/threads/i3d.835/ http://www.phlatforum.com/xenforo/threads/i3d.835/ invalid@example.com (Jnida63) Jnida63 I converted the .pdf file over to a sketchup file. Read the .pdf to see the foam sizes used as I didn't dimension any slots for FFF.
It was designed for 3 different sizes of EPP foam.
I did no Phlatscript or positioning of the parts either Attached files I3d.skp (4.4 MB)Â]]> 29 Thu, 15 Oct 2009 15:20:15 +0000 http://www.phlatforum.com/xenforo/threads/tony-55x65s-skyote.873/ http://www.phlatforum.com/xenforo/threads/tony-55x65s-skyote.873/ invalid@example.com (filthybeast) filthybeast I think the skyote is one the best lookin bipes out there, flies great to, enjoy- Attached files skyote.skp (738.1 KB)Â]]> Mon, 25 May 2009 21:52:58 +0000 http://www.phlatforum.com/xenforo/threads/micro-ultimate.520/ http://www.phlatforum.com/xenforo/threads/micro-ultimate.520/ invalid@example.com (Flashsolutions) Flashsolutions
http://www.rcgroups.com/forums/showthread.php?t=516219

I don't have anything to power it (yet), but it was fun to build and look at.

I used a 1/32" bit for this since the foam is so thin.

Be sure to check the thread for paint schemes,...

Micro Ultimate]]> 16 Mon, 22 Dec 2008 13:45:22 +0000 http://www.phlatforum.com/xenforo/threads/thatovalguys-iluminado-bipe.133/ http://www.phlatforum.com/xenforo/threads/thatovalguys-iluminado-bipe.133/ invalid@example.com (Crash) Crash
The original plane was designed for a 28" wingspan, but I wanted something a little larger, so I scaled it up to a 32" wingspan. All of the notches have been adjusted to allow for 6mm foam (which is what I have taken to using for FFF, as well).

If you are wondering what my process is... Open the PDF in Adobe Illustrator CS, bomb away any unwanted...

ThatOvalGuy's Iluminado Bipe]]> 2 Sat, 13 Dec 2008 14:26:13 +0000 http://www.phlatforum.com/xenforo/threads/ultimate-3d-bipe.10/ http://www.phlatforum.com/xenforo/threads/ultimate-3d-bipe.10/ invalid@example.com (7up) 7up
Zip file contains SU and Phlatcode files. Attached files Ultimate 3D.zip (340.2 KB)Â Ultimate 3D Bipe]]> 2