They might be single or double wing aircraft, but they are so unique that they need their own section. Sun, 08 Mar 2026 06:47:03 +0000 Sun, 08 Mar 2026 06:47:03 +0000 PhlatForum http://www.phlatforum.com/xenforo/forums/strange-aircraft/ Wed, 13 Dec 2017 12:53:06 +0000 http://www.phlatforum.com/xenforo/threads/flying-surfer-dude.646/ http://www.phlatforum.com/xenforo/threads/flying-surfer-dude.646/ invalid@example.com (theothers) theothers Flying 'SURFER DUDE'

Check out the RCgroups thread here http://www.rcgroups.com/forums/showthread.php?t=1082461




- Moved the CG back a little by moving the widest part of the surf board in the front to the back

- Elevon angle is greater and elevons are slightly bigger now

- Added a second center stringer that includes the rudder mod. So now you have the choice of using either the elevon only setup with a normal...

Flying Surfer Dude!]]> 159 Thu, 01 Dec 2016 06:57:02 +0000 http://www.phlatforum.com/xenforo/threads/flying-santa.30/ http://www.phlatforum.com/xenforo/threads/flying-santa.30/ invalid@example.com (kram242) kram242
This design has not been flight tested by me, but Santa has logged a ton of hours on this one
This design has a 20" Sleigh Span (wing span) :mrgreen:

Here is the link for the Christmas Show build
http://www.phlatforum.com/viewtopic.php?f=180&t=1450&start=0
Enjoy
Mark Attached files...

Flying Santa]]> 20 Tue, 03 Mar 2015 01:30:46 +0000 http://www.phlatforum.com/xenforo/threads/honey-bee.4595/ http://www.phlatforum.com/xenforo/threads/honey-bee.4595/ invalid@example.com (rescue911) rescue911 1 Fri, 30 Jan 2015 17:40:01 +0000 http://www.phlatforum.com/xenforo/threads/strange-plane.3963/ http://www.phlatforum.com/xenforo/threads/strange-plane.3963/ invalid@example.com (rescue911) rescue911 17 Fri, 07 Mar 2014 21:31:23 +0000 http://www.phlatforum.com/xenforo/threads/combat.26/ http://www.phlatforum.com/xenforo/threads/combat.26/ invalid@example.com (kram242) kram242 ComBAT
This plane was designed for air combat it can land/crash any-which-way and it will right itself and be ready for take off again.

This video is long but it shows the toughness of the comBat

Here we are on the water



Note *
There are two versions the Vamped up version that has a vampire style to it and the original version. Also note that depron is way too...

ComBAT]]> 10 Tue, 10 Sep 2013 02:05:08 +0000 http://www.phlatforum.com/xenforo/threads/aerodyne.3055/ http://www.phlatforum.com/xenforo/threads/aerodyne.3055/ invalid@example.com (kram242) kram242 Not sure how this one got left out, but there has been some recent interest in this aerodyne and thought I would post what have have.
This is Dr.Lippisch 'Aerodyne' a fluid sustained aircraft .
The Harrier jump-jet, world famous for its VTOL capabilities employs many of Lippisch's VTOL principals.
You can read more about the research and see pics of test rigs here:...

Aerodyne]]> 4 Thu, 18 Jul 2013 12:19:42 +0000 http://www.phlatforum.com/xenforo/threads/phlat-man.1427/ http://www.phlatforum.com/xenforo/threads/phlat-man.1427/ invalid@example.com (rcflyboynj) rcflyboynj
More to come Soon :mrgreen:

Nate Attached files ]]> 35 Tue, 08 Jan 2013 21:02:02 +0000 http://www.phlatforum.com/xenforo/threads/hover-hopper-flying-hovercraft.1141/ http://www.phlatforum.com/xenforo/threads/hover-hopper-flying-hovercraft.1141/ invalid@example.com (kram242) kram242 We are going to take this to the indoor fly-in tomorrow night (1/14/10) and give it a test

This is the first prototype and there are parts that do not line up right, but I said I would post it and so here you go.
I will rework the code after testing tomorrow there may be more changes at that point.

The prop is 10x4.7 with a Blue Wonder Motor
The Skirt is made from 3mm contractor bag'
The craft is from 1/4"...

Hover Hopper - Flying Hovercraft]]> 18 Thu, 03 Jan 2013 03:00:48 +0000 http://www.phlatforum.com/xenforo/threads/birds-the-word.454/ http://www.phlatforum.com/xenforo/threads/birds-the-word.454/ invalid@example.com (Bohh) Bohh
I've created the files needed to make an Eagle Plan based of a plan on found on RCG. Here's a sneak peak. I will post the files once I get one cut out and ensure everything is correct. Attached files ]]> 85 Fri, 12 Oct 2012 01:21:29 +0000 http://www.phlatforum.com/xenforo/threads/flying-skateboard.864/ http://www.phlatforum.com/xenforo/threads/flying-skateboard.864/ invalid@example.com (leadfeather) leadfeather 30 Thu, 14 Jun 2012 22:59:48 +0000 http://www.phlatforum.com/xenforo/threads/piplane-by-sr71fan.636/ http://www.phlatforum.com/xenforo/threads/piplane-by-sr71fan.636/ invalid@example.com (Crash) Crash
My file package is set up for 6mm foam, but if it flies nicely I'll be cutting another one out of 9mm EPP.

If you cut this one out and you like how it flies, be sure to check out the thread over at RCG and show your love...

PiPlane by sr71fan]]> 25 Fri, 18 May 2012 20:12:47 +0000 http://www.phlatforum.com/xenforo/threads/my-next-project.2826/ http://www.phlatforum.com/xenforo/threads/my-next-project.2826/ invalid@example.com (rescue911) rescue911
Attached files ]]> 9 Sat, 12 May 2012 16:45:44 +0000 http://www.phlatforum.com/xenforo/threads/my-tdactyl.2820/ http://www.phlatforum.com/xenforo/threads/my-tdactyl.2820/ invalid@example.com (rescue911) rescue911
Attached files ...

My TDactyl]]> 7 Tue, 08 May 2012 15:46:50 +0000 http://www.phlatforum.com/xenforo/threads/ironman_flydude.2785/ http://www.phlatforum.com/xenforo/threads/ironman_flydude.2785/ invalid@example.com (kram242) kram242 Here is the FlyDude we were working in the Christmas PhlatLAB show.
I ended up re-drawing the whole thing as well as modifying it to be the Ironman mark 2 suit!
Its aprox. 47" tall and will accept a 8" prop.
This should be a good foundation for other super hero designs as well as micro sizing it (just resize one of the slots to 3mm with the tape tool). It was a LOT of work to get this right and I have not cut it out yet so let me know if you find any problems. I did a...

IronMan_FlyDude]]> 48 Tue, 20 Dec 2011 04:17:36 +0000 http://www.phlatforum.com/xenforo/threads/my-eagle.2583/ http://www.phlatforum.com/xenforo/threads/my-eagle.2583/ invalid@example.com (rescue911) rescue911 Im sure you SKP pro's can do the rest and get it flying .If anyone finishes it and makes a G-code,let me know if it will fly. Not sure if the G Code is right so you Guy's set the Parameters and everything right. Attached files Eagle 2 Body Re-Scaled.cnc 2.cnc (36...

My Eagle]]> 18 Sat, 10 Dec 2011 01:24:44 +0000 http://www.phlatforum.com/xenforo/threads/angry-bird.2508/ http://www.phlatforum.com/xenforo/threads/angry-bird.2508/ invalid@example.com (nstaller) nstaller

Cg-4 5/8 from LE
2-4g servos
1-1200kv motor
10a esc
3s 800 mah Attached files angry bird2final.cnc (25.1 KB)Â...

angry bird]]> 70 Fri, 28 Oct 2011 23:16:27 +0000 http://www.phlatforum.com/xenforo/threads/paper-airplane-rc.2509/ http://www.phlatforum.com/xenforo/threads/paper-airplane-rc.2509/ invalid@example.com (strictly3d) strictly3d
This is my first post of a project. I hope it is done right. I decided to do something with some scrap foam so I was folding a paper plane to throw to my new puppy and the idea hit. I am sure they have them already but here is a 6mm foam "paper airplane" It has a 24 inch wingspan and is 30 inches long. I used the electronics from my crashed ParkZone's Micro Stryker and flies very well. I did modify the battery leads to accept the larger ThunderPower 2 cell 480 mah battery. It will...

Paper Airplane RC]]> 8 Sun, 02 Oct 2011 11:18:18 +0000 http://www.phlatforum.com/xenforo/threads/kx-5-24-flying-saucer.486/ http://www.phlatforum.com/xenforo/threads/kx-5-24-flying-saucer.486/ invalid@example.com (KX-5) KX-5
KX-5.24 Flying Saucer]]> 42 Sat, 01 Oct 2011 17:05:22 +0000 http://www.phlatforum.com/xenforo/threads/pod-perfectly-ordinary-design.1102/ http://www.phlatforum.com/xenforo/threads/pod-perfectly-ordinary-design.1102/ invalid@example.com (ApachePilot) ApachePilot
It will fly from snow, grass, water and hardwood floors.... I have flown POD and found it to be quite the performer, though light fingers are needed or a system with dual rates. You could also make the elevons a bit smaller.

There are only 11 parts overall to complete this airframe, I hope you enjoy, details and sketchup plans will be posted later this week. POD and Arctic Cat are only a couple of my designs. I have 209 more that I will...

POD Perfectly Ordinary Design]]> 4 Sun, 05 Jun 2011 14:08:09 +0000 http://www.phlatforum.com/xenforo/threads/flying-car.2278/ http://www.phlatforum.com/xenforo/threads/flying-car.2278/ invalid@example.com (magicjim) magicjim http://www.rcgroups.com/forums/showthread.php?t=1447811

I took the time and converted the multipage PDF to vector file.

My CNC router is small and it will be difficult to actually cut the plane but if someone with phlat printer is
interested here are the files, it looks like a fun project
Best Regards and have fun .
file1:...

Flying CAR]]> 1 Tue, 03 May 2011 20:31:31 +0000 http://www.phlatforum.com/xenforo/threads/phlatbat.2212/ http://www.phlatforum.com/xenforo/threads/phlatbat.2212/ invalid@example.com (kram242) kram242 Just another crazy idea I had one day and I finally had a chance this afternoon to build one, I'll call it the PhlatBAT (even though it looks more like a bird )
Here is the build of version 1 of the PhlatBAT
Its an attempt to create and airframe that can change its center of lift during flight.
This is as far as I got today an maybe it will spark some interest for you guys that want to give it a try.
There are a lot of changes that can be made but this will give you a good...

PhlatBAT]]> 23 Sun, 23 Jan 2011 14:21:07 +0000 http://www.phlatforum.com/xenforo/threads/broomer.29/ http://www.phlatforum.com/xenforo/threads/broomer.29/ invalid@example.com (kram242) kram242
Attached files Broomer.cnc (29.6 KB)Â Flying broom.skp (2.4 MB)Â]]> 7 Tue, 14 Sep 2010 16:08:50 +0000 http://www.phlatforum.com/xenforo/threads/hybrid-construction.1706/ http://www.phlatforum.com/xenforo/threads/hybrid-construction.1706/ invalid@example.com (KX-5) KX-5






Attached files Hybrid construction]]> 5 Mon, 02 Aug 2010 03:56:07 +0000 http://www.phlatforum.com/xenforo/threads/martinet-by-gerard-jumelin.1649/ http://www.phlatforum.com/xenforo/threads/martinet-by-gerard-jumelin.1649/ invalid@example.com (ZombieBait) ZombieBait
The original plans may be obtained from the website, located at...

Martinet by Gerard Jumelin]]> 8 Tue, 13 Jul 2010 11:04:03 +0000 http://www.phlatforum.com/xenforo/threads/aoa-stager-wing.1596/ http://www.phlatforum.com/xenforo/threads/aoa-stager-wing.1596/ invalid@example.com (AnyAirRc) AnyAirRc
It is a stager wing bipe of sorts with a huge stager. Also I wanted to try a new method of pitch control. I plan on using the AOA (angle of attack) of the main wing to climb and dive. The first version pictured here glides great and 0 degrees AOA my next step is to put radio gear in her and try it. Do you think it will...

AOA Stager Wing]]> 26 Sat, 26 Jun 2010 03:05:26 +0000 http://www.phlatforum.com/xenforo/threads/ready-to-rumble.1589/ http://www.phlatforum.com/xenforo/threads/ready-to-rumble.1589/ invalid@example.com (KX-5) KX-5
The specs are:

24" diameter
Symetrical covered wing
18 oz. AUW
Himax 2808 1180 kv
8x3 APC...

Ready to rumble.]]> 9 Tue, 16 Feb 2010 22:30:21 +0000 http://www.phlatforum.com/xenforo/threads/niteowl.356/ http://www.phlatforum.com/xenforo/threads/niteowl.356/ invalid@example.com (kram242) kram242 Have not tried it yet but it should be ok
When someone cuts it out let me know how it works
The battery is mounted out from the center of gravity a few inches and back a little along the elevator line so that no mater how the niteowl turns it will always right itself into a high alpha. Therefore there is no need for orientation paint because it will always want to right itself. If you get lost while flying just let go of the sticks for a sec and it will...

NiteOWL]]> 34 Tue, 09 Feb 2010 04:52:57 +0000 http://www.phlatforum.com/xenforo/threads/radio-control-flying-snowmobile.1083/ http://www.phlatforum.com/xenforo/threads/radio-control-flying-snowmobile.1083/ invalid@example.com (ApachePilot) ApachePilot
I have never seen one throughout history, reading the mags or at any flying field I have been to in 20+ years, so why not give it a whirl?

Below are a couple starter files showing what I am contemplating. Also, as soon as I can find my camera, I will post other pics as well. I am currently at the point of installing control functions and am posting this in hopes of finding the (best) way in which to achieve adequate control.

If any of you Phlat Bros and...

Radio Control flying Snowmobile]]> 24 Tue, 26 Jan 2010 23:14:51 +0000 http://www.phlatforum.com/xenforo/threads/n2rcplanes-foamenator.1177/ http://www.phlatforum.com/xenforo/threads/n2rcplanes-foamenator.1177/ invalid@example.com (Crash) Crash
There were no plans posted anywhere that I could find, but there were numerous pictures with all of the dimensional information one could ask for. Naturally, I had to knock it off for FFF...

N2rcplanes Foamenator]]> 1 Thu, 21 Jan 2010 23:27:09 +0000 http://www.phlatforum.com/xenforo/threads/tumble-wing.1167/ http://www.phlatforum.com/xenforo/threads/tumble-wing.1167/ invalid@example.com (kram242) kram242 The Tumble Wing designed by Roy Clough Jr.
This was redesigned from an old plan set scanned from a model airplane magazine in PDF format.
I took a screen shot of the PDF and traced the parts in Sketchup.

Material needed

*-(1) 3mm foam (1 sheet)
*- (1) 1/16" Plywood (12"x6" MidWest http://www.midwestproducts.com/catalog_ ... &sa2_id=27 )
*- (2) 1/8" Carbon Rod
*- (1)...

Tumble Wing]]> 8 Thu, 07 Jan 2010 20:35:05 +0000 http://www.phlatforum.com/xenforo/threads/u-hatch.1115/ http://www.phlatforum.com/xenforo/threads/u-hatch.1115/ invalid@example.com (7up) 7up
The bottom piece that folds underneath is meant to be glued in place and still allow the hatch to open and close. Keep it closed with magnets or velcro.

The formers are optional, place them to best secure your battery. The side holes are also optional. Makes it easy to grab and open up.




Attached files...

U-Hatch]]> 3 Wed, 06 Jan 2010 13:32:34 +0000 http://www.phlatforum.com/xenforo/threads/nothing-plane.1105/ http://www.phlatforum.com/xenforo/threads/nothing-plane.1105/ invalid@example.com (almostthere) almostthere
Attached files nothingplane2.skp (72.5 KB)Â]]> 13 Tue, 15 Dec 2009 18:14:26 +0000 http://www.phlatforum.com/xenforo/threads/meet-harley.1063/ http://www.phlatforum.com/xenforo/threads/meet-harley.1063/ invalid@example.com (7up) 7up
[EDIT 12-17-09] Added SU and CNC file Attached files Meet Harley ]]> 6 Sun, 29 Nov 2009 03:52:57 +0000 http://www.phlatforum.com/xenforo/threads/micro-knightowl.989/ http://www.phlatforum.com/xenforo/threads/micro-knightowl.989/ invalid@example.com (kram242) kram242
3mm Depron
All power parts are from the micro flying truck, but I think you could use any cheap micro heli parts to make this work


Have fun!

Attached files MicroKnightOWL_3mm.cnc (46.7 KB)Â NightOwlMICRO_3mm.skp (4.2 MB)Â...

MICRO KnightOWL]]> 2 Sat, 21 Nov 2009 01:37:47 +0000 http://www.phlatforum.com/xenforo/threads/hog-21-by-frank-rcfc.953/ http://www.phlatforum.com/xenforo/threads/hog-21-by-frank-rcfc.953/ invalid@example.com (mrbubbs) mrbubbs Post by Frank rcfc » Fri Jan 02, 2009 9:49 pm

Ah yes. The HOG. Gotta love RCG for their oodles and oodles of scratch built plans and such. This one is a combat type. 62.5 pilot ressurected this one according to his post. Nice little flier looks like. I included score lines where needed to help in folds on the fuse. And also lite scores for the center lines to help alignment.



Attached files Hog.zip...

HOG 21 by Frank rcfc]]> 1 Fri, 20 Nov 2009 11:31:36 +0000 http://www.phlatforum.com/xenforo/threads/dagger-dart-by-3dmon.954/ http://www.phlatforum.com/xenforo/threads/dagger-dart-by-3dmon.954/ invalid@example.com (mrbubbs) mrbubbs Post by 3DMON » Thu Oct 09, 2008 6:11 pm

My first original design using Sketchup.

The Dagger Dart.
35" Wing Span.
Pusher prop.
Ideal power setup: Park jet motor swing up to a 6" prop



Attached files DaggerDart.zip...

Dagger Dart by 3DMON]]> 1 Fri, 20 Nov 2009 07:09:20 +0000 http://www.phlatforum.com/xenforo/threads/4f-51-fat-flat-floppy-foamy-24-by-frank-rcfc.961/ http://www.phlatforum.com/xenforo/threads/4f-51-fat-flat-floppy-foamy-24-by-frank-rcfc.961/ invalid@example.com (mrbubbs) mrbubbs Post by Frank rcfc » Fri Dec 26, 2008 7:24 pm

I was nosing around on the forums and came across another Gene Bond creation. Nice squatty combat plane with lots of wing area. Made for elevon control but I still made the rudder separate. I needed the space. 24" wingspan and 12" at the root. As of this writing I am just about done building this neat little creation. Quick easy build. Servo holes are in the suggested area as well as the carbon fiber rod slots...

4F-51. fat,flat,floppy foamy. 24 by Frank rcfc]]> Fri, 20 Nov 2009 07:06:12 +0000 http://www.phlatforum.com/xenforo/threads/hoot-22-by-frank-rcfc.960/ http://www.phlatforum.com/xenforo/threads/hoot-22-by-frank-rcfc.960/ invalid@example.com (mrbubbs) mrbubbs Post by Frank rcfc » Sat Dec 27, 2008 3:21 am

Ah yes who can refuse this little gem. 22" Hoot. A Carl Vogt design. simple to build and fun to fly. Had fun working this up. Got to love the simple lines.This file includes the skp,cnc and jpeg of the parts layout.

Attached files Hoot.zip (163.5 KB)Â]]> Fri, 20 Nov 2009 07:00:34 +0000 http://www.phlatforum.com/xenforo/threads/myfo-19-by-frank-rcfc.958/ http://www.phlatforum.com/xenforo/threads/myfo-19-by-frank-rcfc.958/ invalid@example.com (mrbubbs) mrbubbs Post by Frank rcfc » Fri Dec 26, 2008 8:25 am

Alright. This is one that I cut out twice on different ocassions with the Phlatprinter. My gene Bond rendition. Has all files needed including a jpeg shot of the parts layed out.
This one is fun to fly as it has elevons for control. For further info go to RCG. It's where I got the plans from.



Attached files MyFo.zip (61.1 KB)Â]]> Fri, 20 Nov 2009 06:53:05 +0000 http://www.phlatforum.com/xenforo/threads/3f-chicken-48-by-frank-rcfc.955/ http://www.phlatforum.com/xenforo/threads/3f-chicken-48-by-frank-rcfc.955/ invalid@example.com (mrbubbs) mrbubbs Post by Frank rcfc » Fri Jan 02, 2009 7:06 pm

3F Chicken by Johnnie W2. Couldn't resist working this up in Sketchup. That wing design was fun to work out. Lot of curves. Give that X and Y a workout. This is a 2 part deal. Just couldn't quite get it all on one sheet and be safe.
You'll find more details on RCG. Just look up 3F Chicken in the search.



Attached files 3F Chicken.zip (644.9...

3F Chicken 48 by Frank rcfc]]> Fri, 20 Nov 2009 06:43:14 +0000 http://www.phlatforum.com/xenforo/threads/funky-flier-36-by-frank-rcfc.951/ http://www.phlatforum.com/xenforo/threads/funky-flier-36-by-frank-rcfc.951/ invalid@example.com (mrbubbs) mrbubbs Post by Frank rcfc » Sun Jan 04, 2009 6:12 pm

Funky flier 36" wing span. Flew this version earlier this summer. Great platform for AP. Thanks to Tony65x55 for this workup.



Attached files Funky Flier 36.zip (261.3 KB)Â]]> Sat, 14 Nov 2009 17:08:01 +0000 http://www.phlatforum.com/xenforo/threads/the-fs-5-45-mother-ship-is-completed.901/ http://www.phlatforum.com/xenforo/threads/the-fs-5-45-mother-ship-is-completed.901/ invalid@example.com (KX-5) KX-5
Here are some pictures of the completed saucer.























Attached files ...

The FS-5.45 Mother Ship is completed]]> 20 Wed, 28 Oct 2009 01:31:45 +0000 http://www.phlatforum.com/xenforo/threads/goldeneye-uav.27/ http://www.phlatforum.com/xenforo/threads/goldeneye-uav.27/ invalid@example.com (kram242) kram242














Attached files...

GoldenEYE-UAV]]> 13 Thu, 22 Oct 2009 23:49:07 +0000 http://www.phlatforum.com/xenforo/threads/bat-wing-37.756/ http://www.phlatforum.com/xenforo/threads/bat-wing-37.756/ invalid@example.com (frankrcfc) frankrcfc

Attached files Bat Wing 37.zip (133.9 KB)Â Bat wing 37]]> 6 Fri, 09 Oct 2009 13:52:45 +0000 http://www.phlatforum.com/xenforo/threads/box-plane.31/ http://www.phlatforum.com/xenforo/threads/box-plane.31/ invalid@example.com (kram242) kram242 I never tested this plane but I thought the concept was cool so here you go.
Good luck with it.]]> 5 Tue, 06 Oct 2009 23:21:50 +0000 http://www.phlatforum.com/xenforo/threads/the-invasion-is-emminent-the-mother-ship-is-being-built.794/ http://www.phlatforum.com/xenforo/threads/the-invasion-is-emminent-the-mother-ship-is-being-built.794/ invalid@example.com (KX-5) KX-5
The Invasion is emminent. The Mother Ship is being built.]]> 9 Sat, 26 Sep 2009 18:40:58 +0000 http://www.phlatforum.com/xenforo/threads/big-pi-plane-24.825/ http://www.phlatforum.com/xenforo/threads/big-pi-plane-24.825/ invalid@example.com (Flashsolutions) Flashsolutions
I have had so much fun with this one that I decided it was time to scale it up.

The circle is cut from 9mm Depron. The top fuse is 6mm and the bottom is two laminated 6mm pieces to give it a total thickness of 12mm.

I hope you enjoy it as much as I have... Attached files 24inchCircleFirewall.skp (88.9 KB)Â...

Big Pi-Plane 24]]> 2 Thu, 10 Sep 2009 17:48:26 +0000 http://www.phlatforum.com/xenforo/threads/skycart-by-leadfeather.724/ http://www.phlatforum.com/xenforo/threads/skycart-by-leadfeather.724/ invalid@example.com (kram242) kram242 Ok the Skycart has been added to the free plans section
You can get it a little further down the page here http://www.phlatforum.com/viewtopic.php?p=9917#p9822
Have fun!!
Mark

Hey guys just wanted to show you Leadfeathers/Motorheads Skycart design he has been working on.
This guy comes up with some really cool stuff!
He posted the plans so I have converted them into a Sketchup Model
This is going to be a...

SkyCart by Leadfeather]]> 27 Fri, 28 Aug 2009 02:24:59 +0000 http://www.phlatforum.com/xenforo/threads/goldguys-nutball.751/ http://www.phlatforum.com/xenforo/threads/goldguys-nutball.751/ invalid@example.com (rayclark) rayclark
FYI:
The code is for 9mm Epp foam and I am using a 1/16" cutting bit. So be sure to make any adjustments according to what you are...

GoldGuy's Nutball]]> 5 Sat, 16 May 2009 13:23:38 +0000 http://www.phlatforum.com/xenforo/threads/flying-truck.28/ http://www.phlatforum.com/xenforo/threads/flying-truck.28/ invalid@example.com (kram242) kram242 Here is a video showing the elevator and motor hinged to one servo to work together.]]> 6