1. Hey guyz. Welcome to the All New Phlatforum!



    Sign Up and take a look around. There are so many awesome new features.

    The Phlatforum is a place we can all hang out and

    have fun sharing our RC adventures!

  2. Dismiss Notice

MeArm

Discussion in 'Robots' started by cel22262, Jan 8, 2017.

  1. cel22262

    cel22262 New Member

    Offline
    Messages:
    11
    Trophy Points:
    3
    Location:
    Sun City, AZ
    My grand kids are working on robotics in their STEM classes and I thought this might be a fun project.
    100_9077.jpg
    I cut this from a sheet of 'Dry Erase' board (I got mine from HD) using these bits.
    100_9073.jpg
    1/16th straight bit (Rockler) and a Dremel v-carve bit. The project is cut in two passes (using techniques mentioned by swarfer) - the first cut using the v-carve bit cuts the part numbers, the second cut uses the 1/16th bit......
    100_9069.jpg
    Here are the files.
     

    Attached Files:

    3DMON and swarfer like this.
  2. TigerPilot

    TigerPilot Well-Known Member

    Offline
    Messages:
    1,578
    Trophy Points:
    48
    Very nice!!! :doubleup: Now all it needs is a set of wheels and off you go. :D:D
     

Share This Page