Sign Up and take a look around. There are so many awesome new features.
have fun sharing our RC adventures!
Thanks a lot guys. japala, you are correct about the formatting of numbers causing a problem. MartinT sent all the info I needed to fix it but it...
Hi folks, sorry I've been missing. Thanks for all the comments, I'll try to answer the questions I can for now. That is correct. The gcode must be...
Yep, a ticket is needed. There are some slight differences in the way Ruby works on the Mac vs Windows. It really comes down to making sure...
I forgot to mention that G61 setting is a feature that can be set in the next version of the PS.
Shaun is correct on the G61 except it is called exact path mode. G61.1 is exact stop but I am not sure exactly what the difference is between the...
No, there is going to be a rectange that fits within the lip on the bottom of the box. What looks like an inner box are paths for air to move...
I got home from work too late this week to start up the PP. Tomorrow when the rain rolls in I'll try to finish up cutting the parts. I am finally...
Thanks guys. It only took 5 passes but the last one was just for cleanup. The param box was set for 1/4" material with 105% overcut and 1/16"...
I started cutting the 1/4" MDF today. I only finished 6 of the 11 parts but it took a couple of hours to complete the cutting. I used the 1/8"...
I wonder if it is the tinker factor. I make parts and changes to the tank all the time and that is why I started it 4 years ago. I built the sump...
Thanks for the comments guys. I have a marine aquarium too mavacpjm71. Mine is just a 74 gallon display with 40 gallon sump but we enjoy it. I am...
This weeks project is a lightbox. A lightbox is basically a rectangle cabinet that has a light source inside and a plastic or glass surface that...
Awesome, I'm glad it got some exposure. These little parts are exactly why I started in CNC. I always have tons of ideas for things all over the...
I have nicked my fingers a few times because I'm not paying attention when grabbing the PhlatCutter. It is an excellent tool for liberating a...
Once again, this is correct. The face is used to locate where in/outside cuts are allowed. Once the cut line is made it doesn't matter if the face...
Follow Kwok's instructions and you should be fine. Some installations it activates properly and sometimes not, I haven't figured out exactly what...
Yep, there is already a ticket. It will be fixed for 924.
That is actually a pretty good assessment. When an arc is being output to gcode additional code needs to be added to recalculate the actual arc...
While I don't test anything on older versions of SU I also haven't used any API features introduced in newer versions. The Code Crunchers here...
Hi swim93, welcome to the forum. A few sections below this one on the main page is a forum called PhlatScript Help. Go ahead and start a new...
Separate names with a comma.