Mark told me he cut his PPI Parts with an 1/8" bit
Well when i code this part for that bit it wont produce code for the outside cut tool.
The outside cut tool has holes in it and stray lines .

HELP !

only thing i can figure is he didnt use sketchucam to produce his code ???

 

Also i cant upload SKP files

 

Got the code to take after redoing a couple of the dog bones and cleaning up some stray lines
also had to manually create the face the old fashion way

 

Strays lines are the cause of the Gcode not generating, nothing to do but clean up the drawing properly.

 

Wish i thought about that

 

what part of the drawing needs cleaned up ?
if your telling me i need to manually clean up the broken and stray lines created by the faulty outside cutline tool , That's not possible with all the parts i want to cut

I think The tool needs looked at ..............

 

And that answer didn't help with me not being able to upload skp files atall !

 

I got no snag, so to speak .
I could of course do just that , erase redraw and replace . BUT " i should not have too ..
The tools should be made to work correctly / Thats all im saying ....... OH
And your reply didnt help me be able to upload the skp files either ..........