Sign Up and take a look around. There are so many awesome new features.
have fun sharing our RC adventures!
And yes, you were right once again! It was the acceleration setting in my controller! Thanks again!
I am in fact using the latest version. And yes, it is a G00 move. I am using an Arduino with Ramps 1.4 loaded with Repetier software. It could...
Swarfer, I have one last problem if you could.... The first line of GCODE that positions the Z axis has no feedrate and depending what operation...
A picture is worth a thousand words.... Much clearer now. And to answer previous questions, 45mm was the distance between the table top and...
Think I found a solution. Use_Home_Height set to True seems to eliminate the warning.
I tried setting the Max_Z to 70. That causes the bit to plunge 25mm into the work piece, so that is out of the question. It has to be set to...
Ahhh, okay. It has been a long long while since I messed with CNC and the phlatscript has changed dramatically since I last used it. I thought...
I ran into this problem after inserting a Phlatbone radius on a corner. After isolating it, I created these test files. The error is erroneous...
It sold for $650
The Gecko GS540 has been my choice from day one. It has current limiting built in, no need for adjustments of any kind and has never given a...
Looking to sell my work horse PP3. It features a Gecko GS540 controller which has been absolutely flawless, a Bosch Pony Router and a Sharpie...
Hi David, I am thinking about selling my Phlatprinter III. It is kit #3 and cuts perfectly now that all the mods were made to it which includes...
There are so so many reasons to go with the MK III vs the MKI. 1. Construction - you can disassemble the MK III to replace parts 2. Overhead vs...
Separate names with a comma.