Sign Up and take a look around. There are so many awesome new features.
have fun sharing our RC adventures!
Here ya go.
are you running inches per min, or mm ? if inches, 40 is still high on acceleration. Lower accel until you can hear it start slow and build up...
you can try 1/4 step or 1/2 step on the X stepper. Make sure all power is off before connecting or disconnecting any wires to the driver board....
Which Phlat printer do you have?
Here's a manual for the easycnc board. It has the ports and pins
The MK2/4 does not drive the stepper motors. It replaces the parallel port card in your computer, or gives you the option of using a computer...
Did you get the adapter cable, that goes from the usb board to the driver board?
Do you have the MK2/4 card installed? Activate license with card plugged in. Do you have movement?
What are the problems? Be specific, some of us have built several CNCs and probably have had the same problems. Setting one of these things up...
I gave it a look, and it is a clean cut path of what looks like the top surface of a simple wing. The rapids are below the surface of the cut...
Hey Buk, Did you ever build a Magnum Reloaded?
Hey, I just found a faster way to do it. Make your part a component. Right click on it. Now ''save as'', and only that part will be saved in...
when I want to use a single part, I go to ''file'' in upper left of the screen click on it then go to ''save as'' click on that, now rename the...
tvcasualty.com has software available for hotwire cutting with sketchup. tvcasualty is a phlatboy from the early days, and designed/invented his...
I have PDF2DXF, so I just Googled DXF 2 PDF, and guess what, the same company who has PDF2DXF has DXF2PDF. Just Google it the software is from...
Separate names with a comma.