Sign Up and take a look around. There are so many awesome new features.
have fun sharing our RC adventures!
hmm, I don't have a dial indicator, just a digital caliper. Maybe someone could explain it (I'll check the calibration as best I can either way)...
Ok, I've replaced the tension rollers with some flange bearings I had laying around. It however is not making a difference. I recalculated the...
I almost said this had no effect because I switched my springs left to right but now that I'm really thinking about it, The foam may be skewing in...
Thankyou for the kind words Mark, they always help at times like this.
Sorry I'm slow to reply, my mother in law passed away Thursday morning sortly after my last post. She was at the end of a lenghty 8 year battle...
Ok, I have the C16 guide kit installed (I'll make a topic on that later) and the foam stays centered very well without draggin on one guide or the...
Well, I got the "samples" of the driver chips in and everything is moving again, and I have a spare chip "just in case" :dance3:
My replacement driver + a spare will be here wednesday, no charge! Gotta love samples...of course we spend $100,000 a year with this vender......
I usually wont go for anything that looks like a profile, but this plane is far to interesting looking to pass up. If it flys good I might try to...
I'll keep the Hi temp ones in mind, But I should be able to get two of the normal ones as samples from one of the vendors at work.
It's the driver chip on mine. I put the Y axis driver in the Z spot and everything powered up properly, I'm going to hook it back up to the...
It appears that the Z axis on my controler board has died. With the stepper disconnected from the driver the red power LED lights up then dims...
I was going to suggest removing the Hub and trying to plug it directly to the computer, or a different hub. Check the Wall-wart for the powered...
Now that would be cool to have :doubleup:
Separate names with a comma.