Sign Up and take a look around. There are so many awesome new features.
have fun sharing our RC adventures!
Here's some initial info to start with. Stuff you already know. Mach3 is the CNC controller software. SketchUcam is using the spindle command...
Hey! Thanks for working with me on this!! I'll provide the Gcode for the examples you requested tonight. The photo image Gcode is created by...
It's been a while to get to this point. But, here is my Open Builds CNC with a 10 watt laser diode riding along. The challenge was getting Mach3...
I've experienced a situation with the router groove depth setting. And maybe this is something I just need to set every time. For example, I can...
I like that idea. However the beam is tapered so there may be better ways to do it to reduce tapered edges and overburn. Guess I had better get my...
I was thinking this is the latest version which is what I have on my machine?? [ATTACH]
Thanks. The manual info does answer my questions. With a test piece that uses 3 passes and my spindle set at 75% power setting, I can see on the...
I'm in the process of adding an Endurance laser module to my CNC machine. I still use Mach3 and the parallel port. I went thru the setup to use...
It's been a while since I've updated my SketchUcam. I was having those issues where the drawing had curves going the wrong way and the center...
I found min_z in the constants.rb file. All is well again. :-)
Where do I change the min_z (or @min_z)? I want to cut 2" foam, but the Z gets limited to -1.4. Here's the gcode. Thanks!! % (Generated by...
Do we have SketchUp 2015 compatibility? I've about had it with SketchUp 2014. It has more bug splats than my windshield in the summer.
Yoram, thanks for the note. So, set Max_z = 0.0 Then, after returning home using the safe height value, it will return my Z to the starting Z...
I've recently updated to the most current version of SketchUcam and noticed a difference in how the Z axis height is controlled. Previous to the...
Separate names with a comma.