Sign Up and take a look around. There are so many awesome new features.
have fun sharing our RC adventures!
I have searched and read in several threads that its possible to change where a cut starts cutting a piece. Something along the lines of erasing...
I might have said it wrong in my first post. I believe both axis are finishing in the same spot but the foam isn't in the same spot.
It's not necessarily both axis. The foam seems to be skewing making it angled and ending up off of where it started. I don't know where to start...
It won't come back to the same home spot on the foam. If the calibration is off, won't it just make the pieces the wrong size. If it off, it will...
Hi I've cut a few kits out on my phlatprinter, but have just recently started making them to sell. Im noticing some skew taking place that messes...
I never heard if Mark found the problem, but he replaced it right away. Hopefully yours will be the same.
That's probably the best solution then. Cut a slightly larger slot. That way it is all in one pass. Thanks for the help.
Sorry it took so long to reply. I can't open it because its a newer version. So the solution is to move the plunge, but I had the same problem if...
I believe they were copied before I did any phlatscript on them.
Right now it has a face and and an outside cut. They are the 2 tall rectangles on the right. The fuse doublers also cut backwards. I have used...
The problem I'm having is both with sketchup and the phlatscript. On the bottom right of the attached file, the 2 wing struts, the outside cut...
Finally got a chance to try out the replacement board. Success!! Finally up and running. Now to work out some of my sketchup files. Found out the...
Put in a pci card with a moschip mcs9865. Same result. Z moves fine but x and y only move one direction. Checking the voltages on the driver board...
New parallel card is at home. I'll try it when I get home tonight and hopefully that will solve my problem. If not, I'll have to get the driver...
I'm using the cable that came with the driver board. I'll check if I have a spare to try.
Tried mach3 r2 with same results. Only two more options. New parallel card or driver board
All the computers are xp 32 bit. I'm using the latest version of mach3 r3.042.040. I'm getting all the signals at the driver board but only at...
It is an easy cnc 3 axis board. I don't see any specs as far as minimum voltage. Do most parallel ports put out 5v? Doesn't that voltage come from...
Yeah I read the other thread. I just measured the voltages. The laptop puts out about 3volts and the desktop I measured was 2.8volts. So the right...
I have it back to moving with the jog. After installing I had to run the driver test and then restart my computer. I have tried 4 different...
Separate names with a comma.
