Sign Up and take a look around. There are so many awesome new features.
have fun sharing our RC adventures!
For a manual solution, create a file called toolchange.cnc and include only the desired command(s) M1. Then join this as the second file.
Fozzy-- Thank you! Thank you! Thank You! Great tool! Scott :D
I took a quick look.It appears that some segments are on the WHITE layer, some segments are on layer0... Try moving everything to the same layer....
Yoram, Yes i use it, but i must admit i do it the easy way. If you follow the setup as mentioned, you get a windows interface (Gsview) that uses a...
I Use GhostView ... Follow Directions below (lots of other conversion techniques also) Go Here: http://research.microsoft.com/en-us/um/ ......
Make sure your bit diameter is correctly listed in the parameters box . Ex, if the parameter says 1/16 and you cut with 1/8 , you'll have a 1/16...
What level does a fully operational MKI Bonez qualify for?
Great Job! Easy to use, works as designed,keeps getting better with each release. A work of programming art! Thanks to the creators and...
Keep Looking... I found it for $26.00 at one Lowes, $9.47 at another about 10 miles apart. (Both are now out), but last weekend I found 1/2 pallet...
>>> Also were there any problems anyone has had when putting there's togeather i need to >>> know about......... Use...
Today, at two local Lowes I found one with 6 bundles of PBIII on clearance at $32.00 (Bought two). At the second only 10 miles away They had at...
Here you go.. Attached files CNC_Viewer_demo.zip (54.4 KB)Â CNC_Viewer_src.zip (199.8 KB)Â
With the source code available anything is possible. I haven't tried this, but there is an Open Source Development Environment for .NET that lets...
Graphic preview possibility VB source code exists to do the graphic rendering - It's really good, I use it to preview before copying over to my...
HobbyCNC board (if you like to solder ) 64.95 + s/h + MPJA 24v 10a 25.00 power supply + MPJA 3*12.95 Steppers(unipolar). I use the HCNC board...
This Ruler tape works well for calibrating the X Axis, Just stick it on a piece of foam at zero and see where it ends up. Attached files [img]
Thank you! This Phlatprinter thing is addicting! I keep wandering down to the basement to cut things just because I can! If only the washer,...
Take a look at this power supply - 24v for $24.00 Puts out 24v @12.5 amps which should allow for future stepper upgrades. I'm using a Hobbycnc...
Will Do. Happy Holidays!
Some friction will exist between the washers and the nut that should limit the wobbling., I'm going to try a pair of sliding rectangles one inside...
Separate names with a comma.
