Hello All.

It seams i blew a chip this morning. now im kinda up a creek.

I was hoping someone here would have a chip or two theye would like to sell...Im having Kanipshuns now that my machine dont work... :?

Thanks

 

you say Potatoe. I say tater.

i have looked everywhere i could think to look. No luck...
Hey do theye have those in stock dorsal ? How much are theye??

 

Thanks Dorsal. But i just called Digikey and placed an order...There phone sales are there 24-7. The part is normally in stock, theye just happened to be out..theye will be back in stock shortly.. she said my ship date will be around 12-23 . ....8 bucks and change each...

So i must push the machine back into the corner for now. Thanks for the link with the phone #

 

Hello Kyyu..

I made a little mistake in one of the posts abuve ......I will correct it .
Here is the part she reccomended i buy http://search.digikey.com/scripts/DkSea ... -1144-2-ND
She said it was a direct replacement and i wouldnt have to buy a large number of them.
so i bought 3.

Hector l also responded to my message with a different part number along with a part number for the chip extractor tool. http://search.digikey.com/scripts/DkSea ... &x=15&y=18

 

Woo Hoo ! Hooray !

My chips have shipped

 

Hello all !

I got my chips the middle of last week and installed them. Made some test runs only to find my machine was loosing steps when at the furthest right of the machine. Since then i have loosen'd the stepper back to the point it was when i first started and made a test cut in the middle portion of the machine. I didn't seam to loose any steps but i do have a lot of little fuzzy,s left on the part i didn't have before that i remember Probably from a dull bit.

Anyways here is the ear file that i just cut

Looks ok to me , cept for the fuzzies Attached files

 

ewo, looks fine....don't worry about the finish...its only foam.... funny, i blew out a chip last week, and im waitin on my chips, lols. randy.

 

Randy, I hope you get yours quicker than i did !
Yea its only foam

 

thanks ewo....i ordered right from hector "easy cnc" it seems as after a certain age ya ain't got nothin but time, lols. also its been so cold here i got plenty of time to make stuff... recently i started to research plastic vacuum forming...I'm getting a real good handle on programming the cut files needed. peace, randy.

 

We are planning on stocking these chips and hope to have them in stock in about a month. Sorry you guyz had to wait so long.

 

This is great news Trish !

I bought 3 and still have 2 for backup. So i shouldnt need any soon (knock on wood)
But it shure will be nice to be able to order from you in the future ....

Thanks